Experience a unique and sporty ride with the Jazzy Select® 6, which includes Active-Trac Suspension for exceptional stability and smooth transitions over more varied terrain.
Call now for more info! 888-570-1113
Drive wheel suspension combined with six wheels on the ground and an innovative articulating beam allow for superior performance indoors and out
Shroud and controller guards to protect against daily wear and tear
Scuffs and scratches are less visible
Depth adjustable, black vinyl high-back seat
Jazzy Select 6
|Weight Capacity||300 lbs.|
|Maximum Speed3||Up to 4 mph|
|Front Wheels||6" solid casters|
|Drive Wheels||10" solid|
|Rear Wheels||6" solid casters|
|Drivetrain||Two-motor, in-line, mid-wheel drive|
|Braking System||Regenerative and electro-mechanical|
|Suspension Type||Active-Trac® (ATX)|
|High-Back Seat (max. size)||20"W x 20"D|
|High-Back Seat-to-Floor Range||21.25" - 23.25"|
|Synergy® Seating||20"W x 20"D|
|Synergy® Seat-to-Floor Range||16.5" - 18.5"|
|Power Elevating Seat Option6||Yes|
|Standard Electronics||40A, PG GC34|
|Battery Size (2 required)||12 volt, U-1|
|Standard Battery Charger||3.5A, off-board|
|Per-Charge Range3,8||Up to 15 miles|
|Battery Weight7||25 lbs. each|
|Weight of Heaviest Piece5||100 lbs.|
|Standard Seat Weight||43 lbs. (comfort, high-back)|
|Standard Seat Size||18" x 18"-20"|
|Medicare Code Coverage||Group 2: Standard (K0822/K0823)|
|Warranty||5-year limited warranty on frame;
2-Year limited warranty on electronics;
2-Year limited warranty on drive motors;
1-Year limited on batteries.
1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2 Without front riggings.
3 Varies with user weight, terrain, battery type, battery condition and tire pressure.
4 40A, PG 6-key VR2 required with Power Elevating Seat Option.
5 Does not include seat or battery weights.
6 Not available with TRU-Balance?.
7 Battery weight may vary based on manufacturer.
8 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Pride Mobility Products Canada is a licensed distributor with Health Canada and the medical device products offered meet or exceed specific Provinces’ requirements/testing prior to release for public use.
The testing requirements were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
Our medical power chairs, scooters and lift chairs are also approved by the U.S. Food & Drug Administration (FDA) as medical products that require specific testing prior to release for public use.
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items tested in accordance with the standards are: