The Jazzy® Elite HD delivers great performance in a front wheel configuration, allowing for great maneuverability and superior climbing performance over thresholds and curb cuts.
The Jazzy® Elite HD features 14” drive wheels for enhanced outdoor performance, combined with a front-wheel drive design to provide tight turns for optimal indoor maneuverability in small spaces.
Front antitip wheels provide ease of mind for handling a variety of terrain.
60 amp controller and intuitive hand control
Large drive wheels for traction on varied surfaces
Compact casters for superior maneuverability
Expansive foot room for comfort and security
Jazzy Elite HD
|Weight Capacity||450 lbs.5|
|Maximum Speed3||Up to 4 mph|
|Front Wheels||3" solid anti-tips|
|Drive Wheels||14" solid|
|Rear Wheels||6" Solid casters|
|Drivetrain||Two-motor, front-wheel drive|
|Braking System||Regenerative and electro-mechanical|
|High-Back Seat (max. size)||24"W x 24"D|
|High-Back Seat-to-Floor Range||20" - 22"|
|Synergy® Seating||24"W x 24"D|
|Synergy® Seat-to-Floor Range||15.75" - 17.75"|
|Standard Electronics||60A, Dynamic Shark|
|Battery Size (2 required)||12 volt, NF-22|
|Standard Battery Charger||5A, off-board|
|Per-Charge Range3,7||Up to 9.8 miles|
|Battery Weight6||37 lbs. each|
|Weight of Heaviest Piece4||99 lbs.|
|Standard Seat Weight||52 lbs. (high-back)|
|Standard Seat Size||20" x 18"-20"|
|Warranty||5-year limited warranty on frame;
2-Year limited warranty on electronics;
2-Year limited warranty on drive motors;
1-Year limited on batteries
1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2 Without front riggings.
3 Varies with user weight, terrain, battery type, battery condition and tire pressure.
4 Does not include seat or battery weights.
5 Maximum weight capacity is reduced to 400 lbs. (181 kg) on 18" deep seat configurations.
6 Battery weight may vary based on manufacturer.
7 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Pride Mobility Products Canada is a licensed distributor with Health Canada and the medical device products offered meet or exceed specific Provinces’ requirements/testing prior to release for public use.
The testing requirements were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
Our medical power chairs, scooters and lift chairs are also approved by the U.S. Food & Drug Administration (FDA) as medical products that require specific testing prior to release for public use.
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items tested in accordance with the standards are: