The Jazzy® Elite 14 is designed for excellent indoor maneuverability and outstanding outdoor capability.
The Jazzy Elite 14 features 14” drive wheels with a front-wheel drive design to provide tight turns around corners.
Large front wheels with anti-tips offer extra stability over obstacles for superior climbing capabilities, enabling you to handle various terrains with ease.
Deliver optimum weight distribution provide superior traction
Scuffs and scratches are less visible
50 amp controller and intuitive hand control
Freewheel levers are easily accessed for caregiver assistance
Jazzy Elite 14
|Weight Capacity||300 lbs.|
|Maximum Speed3||Up to 4 mph|
|Front Wheels||3" solid anti-tips|
|Rear Wheels||6" solid casters|
|Drivetrain||Two-motor, front-wheel drive|
|Braking System||Regenerative and electro-mechanical|
|High-Back Seat (max. size)||20"W x 20"D|
|High-Back Seat-to-Floor Range||20" - 22"|
|Synergy® Seating||20"W x 20"D|
|Synergy® Seat-to-Floor Range||15.75" - 17.75"|
|Standard Electronics||50A, Dynamic Shark|
|Battery Size (2 required)||12 volt, NF-22|
|Standard Battery Charger||5A, off-board|
|Per-Charge Range3,6||Up to 9.8 miles|
|Battery Weight5||37 lbs. each|
|Weight of Heaviest Piece4||99 lbs|
|Standard Seat Weight||52 lbs. (high-back)|
|Standard Seat Size||20"x18-20"|
|Warranty||5-year limited warranty on frame;
2-Year limited warranty on electronics;
2-Year limited warranty on drive motors;
1-Year limited on batteries
1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2 Without front riggings.
3 Varies with user weight, terrain, battery type, battery condition and tire pressure.
4 Does not include seat or battery weights.
5 Battery weight may vary based on manufacturer.
6 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Pride Mobility Products Canada is a licensed distributor with Health Canada and the medical device products offered meet or exceed specific Provinces’ requirements/testing prior to release for public use.
The testing requirements were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
Our medical power chairs, scooters and lift chairs are also approved by the U.S. Food & Drug Administration (FDA) as medical products that require specific testing prior to release for public use.
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items tested in accordance with the standards are: