- Home
- Power Wheelchairs
- Models
- Jazzy Air® 2
Onyx Black
It’s the future of mobility with the Jazzy Air® 2. Elevates 12 inches in 11 seconds and drive at 4 mph while elevated in this sleek, more modern power wheelchair.
Call now for more info! 888-570-1113
Rise 12 inches in just 11 seconds and drive 4 mph while elevated.
Ensures maximum stability in the elevated and non-elevated positions, both indoors and outdoors.
Enjoy greater visibility no matter where you go.
Keep your valuables close at hand with this easily accessible storage.
| Model |
Jazzy Air® 2
|
| Weight Capacity | 300 lbs. |
| Turning Radius1 | 20.75" |
| Width1 | 23.19" |
| Length1 | 41.93" |
| Maximum Speed2 | Up to 4.0 mph (elevated and non-elevated position) |
| Ground Clearance1 | 1" at motor bracket |
| Front Wheels | 6" flat free |
| Drive Wheels | 10" flat free |
| Rear Wheels | 6" flat free |
| Drivetrain | Two motor, Mid-Wheel 6® drive |
| Braking System | "Intelligent Braking" (electronic regenerative, disc park brake) |
| Suspension Type | Active-Trac® with Mid-Wheel 6® Technology |
| High-Back Seat (max. size) | 20"W x 20"-22"D |
| High-Back Seat-to-Floor Range | 21.25” – 33” |
| Battery Size (2 required) | 12 volt, U-1 Optional 40 Ah |
| Battery Weight3 | U1 Batteries: 24.5 lbs. 40 Ah Batteries: 32.5 lbs. |
| Standard Battery Charger | 5 amp, off-board |
| Per-Charge Range2,4 | Up to 16.8 miles (U1) Up to 19.2 miles (40 Ah) |
| Warranty | 5-year limited on frame; 2-Year limited on electronics; 2-Year on drive motors; 1-Year limited on batteries. |
| Notes: 1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections. 2 Varies with user weight, terrain, battery type, battery condition and tire pressure. 3 Battery weight may vary based on manufacturer. 4 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%. |
|
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Pride Mobility Products Canada is a licensed distributor with Health Canada and the medical device products offered meet or exceed specific Provinces’ requirements/testing prior to release for public use.
The testing requirements were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
Our medical power chairs, scooters and lift chairs are also approved by the U.S. Food & Drug Administration (FDA) as medical products that require specific testing prior to release for public use.
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items tested in accordance with the standards are:
